| Quantity: | |
|---|---|
Principle and use:
The water flow generated by the submersible pump passes through the nozzle to form a high-speed water flow. A negative pressure is formed around the nozzle to inhale air. It mixes with the water flow through the mixing chamber and generates a water-air mixed flow in the trumpet-shaped diffusion tube. It is sprayed out at high speed and entrained with many bubbles. It vortexes and stirs in waters of larger area and depth to complete aeration, and its shaft power does not change with changes in submersion depth, and the air intake volume can be adjusted.Because of this, jet aerators can be used in pools with large water level changes.
Features:
The aerator is composed of a submersible electric pump and a jet pump, so that the water body is agitated and oxygenated at the same time, which not only improves the oxygen absorption rate, but also has the impeller without clogging.The powerful one-way liquid flow creates effective convection circulation, and the motor load changes very little with the water level, making installation simple.
Applicable working conditions:
QSB deep water self-priming submersible jet aerator can operate normally and continuously under the following conditions:
1 The maximum medium temperature does not exceed 40°C;
2 The pH value of the medium is between 5 and 9;
3 The medium density does not exceed 1150kg/m3.
Model expression method:
Selection and installation:
When the company is required to assist in model selection, the user should provide relevant data such as pool type, medium characteristics, required air intake, diving depth, etc., so that the company can design and provide equipment to better meet the user's needs.The QSB deep water self-priming submersible jet aerator can be installed in two types: self-coupling type and mobile type.The self-coupling installation is to fix the aeration device and a special base at the bottom of the pool, install the matching support block on the top of the pool, and use guide rails to connect the two
After the submersible electric pump is connected to the specific bracket, it slides down the guide rail to the outlet position of the base. It is automatically coupled and sealed by the weight of the pump.Self-coupling installations eliminate the need for installation or maintenance personnel to enter the puddle to lift and install the electric pump.The mobile installation method is to install the deep-water self-priming submersible jet aerator at the bottom of the pool and rely on its own weight for positioning. It has the characteristics of changeable installation position, flexibility, and low cost.
Mobile installation dimensions of deep-water self-priming submersible jet aerator:
Self-coupling installation dimensions of deep-water self-priming submersible jet aerator:
